Posted in

Can UV gas analyzers measure ozone?

If you’ve ever worked in industrial emissions monitoring, ambient air quality management, or water treatment, you’ve probably asked this question more than once: Can UV gas analyzers measure ozone? As a supplier of these tools, I get this question at least a dozen times a week, and it’s not a simple yes or no answer. It’s a conversation that ties together the science of how ozone interacts with light, the design of modern UV gas analyzers, and the common misconceptions that even industry experts sometimes mix up. Let’s break this down like I do for our customers—straightforward, grounded in real-world testing, and focused on what actually works. UV Gas Analyzer

First, let’s start with the basics of UV spectroscopy, the technology that powers almost all modern gas analyzers. When light passes through a gas sample, specific wavelengths get absorbed by certain molecules. This is Beer-Lambert Law 101: the amount of light absorbed is proportional to the concentration of the gas and the length of the light path through the sample. For ozone, the key absorption band is at 254 nanometers (nm)—a wavelength emitted by low-pressure mercury lamps, which is easy and affordable to work with. That’s the part most people latch onto: ozone absorbs 254 nm light, so UV analyzers must measure ozone, right?

But here’s where the confusion sets in. There are other common gases that also absorb at or near 254 nm. Nitrogen dioxide (NO2), for example, has a strong absorption peak just a few nanometers away, around 210 nm, but it still absorbs a significant amount of 254 nm light. Benzene, toluene, xylene, and even some volatile organic compounds (VOCs) like formaldehyde also have cross-sensitivity to 254 nm UV. If your analyzer is just a single-wavelength UV unit, it will measure a total absorbance from ozone and all those interfering gases—so it can’t tell you how much ozone is actually there. That’s a critical point I emphasize to every customer testing for ozone: not all UV analyzers are created equal.

Our company designs UV gas analyzers specifically for ozone measurement, and that means we’ve built in the safeguards to eliminate cross-interference. Let me walk you through how our ozone analyzers work, because this isn’t just marketing—it’s the result of 10 years of field testing with plants, refineries, and municipal air quality agencies. First, we use a dual-wavelength system. We have a primary lamp at 254 nm, and a reference lamp at a wavelength that ozone doesn’t absorb at all—usually around 280 nm. The reference lamp accounts for any drift in the light source, dust in the sample cell, or other general light loss that doesn’t come from ozone. Then, we use a second wavelength at 255.5 nm, which is an isosbestic point for ozone—meaning ozone absorbs the same amount at 254 nm and 255.5 nm—while NO2 and VOCs absorb very little at 255.5 nm. By subtracting the absorbance at 255.5 nm from the absorbance at 254 nm, we isolate the signal that only comes from ozone. That’s the key innovation that makes our UV analyzers reliable for ozone, not just a generic UV gas detector.

I remember a customer last year, a water treatment plant manager, who came to us after wasting $15,000 on a cheap single-wavelength UV analyzer that was supposed to measure ozone in their contact chambers. They were reporting ozone levels 20% higher than actual, because of interference from chlorine byproducts in their sample. When we installed our dual-wavelength ozone analyzer, within a week they saw they were overestimating ozone by almost 25%—which meant they had been overdosing ozone, wasting money on electricity and chemicals, and even risking damage to their pipe linings from excess ozone. That story sticks with me because it’s a real example of how the difference between a generic UV analyzer and one calibrated for ozone makes all the difference.

Another common question I get: Can UV gas analyzers measure ozone at ambient levels, like in outdoor air? The answer is yes, but again, only if the analyzer is designed for that range. Ambient ozone levels are usually between 0.02 and 0.1 ppm (parts per million), while industrial applications can have ozone levels from a few ppm up to 100 ppm or more. Our line of ozone UV analyzers is calibrated for both ranges—we have low-level units for air quality monitoring stations and high-range units for industrial processes like semiconductor manufacturing, where ozone is used to clean silicon wafers. The Beer-Lambert Law holds in both cases, but we adjust the light path length and detector sensitivity to get accurate readings no matter the concentration.

Wait, there’s another technology that often gets confused with UV gas analyzers for ozone: chemiluminescence analyzers. For years, chemiluminescence was the gold standard for ozone measurement, especially in ambient air monitoring. These work by reacting ozone with nitric oxide (NO) to produce light, which is detected. But chemiluminescence has its own downsides: it requires regular calibration gas, it has moving parts that need maintenance, and it can be affected by other gases like water vapor or sulfur dioxide. UV ozone analyzers, by contrast, have no moving parts (our units don’t even have pumps, unless you need a sample pump for remote sites), require very little maintenance, and are more stable over long periods of time. For industrial users who don’t want to deal with the hassle of gas cylinders and monthly calibration, UV ozone analyzers are often the better choice.

That’s not to say UV analyzers don’t have limitations when it comes to ozone. If you’re dealing with a sample that has extremely high levels of NO2, for example, even our dual-wavelength design can have some minor cross-sensitivity. But in most real-world applications—ambient air, wastewater treatment, industrial ozone generation, food processing (where ozone is used to sterilize produce), and semiconductor manufacturing—those levels are low enough that the interference is negligible. We also offer a built-in interference correction algorithm for common gases like NO2 and sulfur dioxide, which we’ve validated in third-party testing at independent labs. A few years ago, we sent our ozone analyzers to a testing facility in Germany, and they met the EPA’s performance criteria for ambient ozone monitors—something we’re proud of, because that’s the standard most municipal agencies require.

Let me also address a myth I hear all the time: that infrared (IR) analyzers can also measure ozone. Ozone doesn’t have a strong IR absorption band, so IR analyzers are mostly used for gases like CO2, methane, and VOCs. UV is the only reliable spectroscopic method for measuring ozone, which is why almost all modern ozone monitors on the market use UV technology. So when someone asks, “Can UV gas analyzers measure ozone?” the short answer is yes—when they’re specifically designed and calibrated for ozone. A generic UV gas analyzer that measures all gases that absorb 254 nm light won’t work, but a purpose-built UV ozone analyzer will not only measure ozone, it will do it more reliably and cheaply than older technologies.

I want to talk a little about how our customers use our ozone analyzers, because that’s where the rubber meets the road. Last month, a food processing company that freezes vegetables contacted us. They use ozone to sanitize their produce before freezing, and they needed to make sure ozone levels in their processing room stay below OSHA’s exposure limit of 0.1 ppm over an 8-hour day. The cheap single-wavelength analyzer they were using kept giving them readings that were either too high or too low, leading to either over-exposing workers to ozone or under-dosing the produce, which increased food safety risks. We installed our compact ozone analyzers in their processing rooms, and within a day, they had accurate readings that helped them adjust their ozone generators to the right level. They told us it cut their ozone generator’s energy use by 18% in the first month, and they had zero food safety issues related to ozone levels. That’s the kind of outcome that matters, not just the science.

Another area I see a lot of growth in is remote monitoring for ozone generators. Many industrial sites have ozone generators that are located in hard-to-reach areas, so they need analyzers that can transmit data to a central control system. Our ozone analyzers have built-in IoT connectivity, so they send real-time data to plant managers’ phones and computers. That means if ozone levels drift too high or too low, they get an alert immediately, instead of having to send a technician out to the site to take manual readings. We’ve had customers tell us this reduced their unplanned downtime by more than 25% in their ozone-related processes.

Now, let’s get back to the core question: Can UV gas analyzers measure ozone? I think the best way to answer that is to say that they can, but only when they’re engineered for that specific application. The key differentiators are the number of wavelengths, the calibration for ozone’s unique absorption, and the ability to compensate for common interferences. As a supplier, we don’t just sell a UV analyzer and walk away—we work with customers to test their specific sample, their required range, and any potential interferences, to make sure our unit is the right fit. We’ve even modified our analyzer designs for niche applications, like measuring ozone in extreme temperatures (from -40°C to 50°C) for mining sites, or in high-humidity environments for coastal wastewater treatment plants.

I’ve been in this industry for 15 years, and the question about ozone and UV analyzers hasn’t changed much in that time. What has changed is the technology: dual-wavelength systems, better detectors, and IoT connectivity have made UV analyzers more accurate and reliable than ever before. I still get customers who come to us after having bad experiences with generic UV analyzers, and that’s where our team steps in to explain the difference between a one-size-fits-all detector and a purpose-built ozone analyzer.

If you’re in the market for an ozone monitoring solution, whether it’s for industrial emissions, ambient air quality, water treatment, or any other application, you don’t have to settle for inaccurate readings or high maintenance costs. Our UV gas analyzers are designed specifically to measure ozone with the precision and reliability your operations need. We can walk you through your specific requirements, help you understand the interference factors that might affect your readings, and recommend the right model for your application. Don’t let the confusion between generic UV gas analyzers and ozone-specific units derail your monitoring goals. Reach out to our team today to discuss your ozone measurement needs, and we’ll help you find the right solution to meet them.

Gas Detection System References

  1. ISO 13964:2014, Air quality — Determination of the concentration of ozone in ambient air — Method using ultraviolet photometry
  2. U.S. Environmental Protection Agency, Compendium Method TO-3A: Measurement of Ozone in Ambient Air by Ultraviolet Photometry
  3. ASTM D5156-22, Standard Test Method for Measurement of Ozone in Process Gas Streams Using Ultraviolet Absorption Spectroscopy
  4. Wherley, B. et al., 2018. "Interference Corrections for UV-Based Ozone Monitors in High NOx Environments," Journal of the Air & Waste Management Association, vol. 68, no. 10, pp. 1021-1030.

Nanjing AIYI Technologies Co., Ltd.
Nanjing AIYI Technologies Co., Ltd. is one of the most professional uv gas analyzer manufacturers and suppliers in China, specialized in providing high quality products and service. We warmly welcome you to wholesale advanced uv gas analyzer at competitive price from our factory.
Address: Building 12, No.3118 Jiyin Avenue, Jiangning District, Nanjing, Jiangsu, China
E-mail: sales@autequ.com
WebSite: https://www.aiyitec.com/